Call us at: 888-336-7864
Email us at: sale@bioennopower.com
Cart 0
BSK-60 Solar Panel Controller Battery and Charger Kit

BSK-60 Solar Panel Controller Battery and Charger Kit

$399.99

BSK-120 is a solar kit containing: 

  • BSP-60 Solar Panel
  • SC-122420JUD Solar Charger Controller
  • BLF-1220A Battery
  • BPC-1504DC Charger

The Bioenno Power BSP-60 model 60 Watt Foldable Solar Panel is a high output monocrystalline solar panel system designed for ease of use. With higher usable power output than two of our BSP-28 folding solar panels, the BSP-60 is the smallest and lightest of the Bioenno Power high-power line but still offers enhanced field-day performance and the capability of powering most personal electronic devices ranging from radio and communications equipment to laptops. Pair it with a Bioenno Power Pack and you can get even more out of the sun. A Bioenno Power solar system offers clean and modulated output while being completely silent with no EMI/RFI (Electromagnetic Interference/Radio-Frequency Interference). And unlike traditional gasoline generators, sunlight is a bottomless fuel-source you don’t have to pay for. With a solar system, as long as you have sun you have electricity.  This solar panel includes the free padded case.

Please note: Our Solar Panels DO NOT include the Solar Charge Controller - it is sold separately. Always use a Solar Panel with a Solar Charge Controller when using with battery – attaching a panel directly to a battery is not advised.

BSP-60 Specifications 
Maximum Power Output: 60W (30W per panel)
Maximum Voltage: 18V  (per panel)
Maximum Current: 1.7A  (per panel, so 3.4 Amps for both if in parallel)
Open Circuit Voltage: 22V (per panel)
Short Circuit Current: 1.96A  (per panel, so 3.92 Amps for both if in parallel)
Dimensions Folded: 23.5 in. x 18.25 in. x 2.5 in. (596.9 mm x 463.6 mm x 63.5mm)
Dimensions Unfolded:(L x W x H) 47 in. x 18.25 in. x 1.25 in. (1193.8 mm x 463.6 mm x 31.75 mm)
Weight: 14.2 lbs. (6.5 kg.)
Temperature Range: -49°F ~ 185°F (-45°C ~ 85°C)
Connector: 50A Grey PowerPole

Chaining Requirements*
Product can only be chained with matching Solar Panels of the same model with matching voltage and current 
Series: Okay to chain, any number of panels acceptable
Parallel: Okay to chain, any number of panels acceptable

*Wiring and cabling for chaining available upon request 

Policy
Shipping: Standard
Returns/Exchange: 30 Days
Warranty: 2 Year Warranty

Bioenno Power 12V/24V, 20A Solar Charge Controller (Model SC-122420JUD) is a versatile controller for use in solar systems with an integrated LCD display, that is designed to charge LiFePO4 (Lithium Iron Phosphate) batteries (and AGM/SLA batteries)! This solar controller accepts either 12V/24V input from solar panels and can handle up to 20 Amps. Featuring our proprietary CC/CV (Constant Current/Constant Voltage) circuitry, the solar controller provides a regulated voltage output for charging 12V or 24V LiFePO4 (and AGM/SLA batteries). The solar controller also provides a regulated 12V or 24V output for electrical loads (depending on whether a 12V or 24V battery is used).  Solar controllers are required for all solar systems in order to maintain a regulated output voltage to charge batteries and for maintaining a regulating output voltage for loads. 

Please note that for any solar setup in which you are using a panel in conjunction with a battery and/or a load a solar charge controller is absolutely necessary. DO NOT plug a panel directly into your battery or your load!  

This controller does not boost voltage from the solar panel, but instead will regulate a high panel voltage from 50V downwards.  

 

SC-122420JUD User Manual [PDF]

 

Specifications 
System Voltage:  12V or 24V  (automatic detection)
Allowable Range for Input Voltage (from solar panels): 12V to 50V (when using 12V or 24V LiFePO4 Batteries / AGM and SLA batteries)

Output Voltage to LiFePO4 Batteries (and AGM/SLA batteries):  12V or 24V
Output Voltage to Loads:  12V or 24V (depending on battery configuration)
Rated Charge Current (Current Delivered to Battery):  Up to 20A
Rated Load Current:  Up to 20A
Batteries Compatible w/ Controller:  Lithium Iron Phosphate (LiFePO4)
Operating Temperature Range of the Controller:  -31 F to 131 F  (-30 C to 50 C)

 

Compatible 12V Lithium Iron Phosphate Batteries 

Nominal Voltage: 12.8V
Float Voltage:  14.4V
Low Voltage Disconnect (LVD):  10.4V
Low Voltage Recovery (LVR):  11.16V

Automated Charge Settings -- the controller detects the battery to charge:   
“b01:  14.2V”
“b02:  14.4V”
“b03:  14.6V”
"b04: 14.6V"  - Default for LiFePo4 
High Voltage Disconnect (HVD):  15.5V 

 

Compatible 24V Lithium Iron Phosphate Batteries 
Nominal Voltage: 25.6V

Float Voltage:  28.8V
Low Voltage Disconnect (LVD):  20.8V
Low Voltage Recovery (LVR):  23.2V
Boost Voltage:

“b01:  28.8V”
“b02:  28.4V”
“b03:  29.2V”

High Voltage Disconnect (HVD):  31.0V

No Load Loss:  <13 mA
USB Port:  5VDC/1A
Charging Mode:  CC/CV (constant current / constant voltage)
Dimensions:  6.5 in. x 3.46 in. x 1.5 in.(166 mm x 88 mm x 38 mm)
Weight:  0.59 lbs. (0.27 kg)

To Charge AGM/SLA Batteries - Override Procedure

To charge AGM batteries, you have to setup an override in the controller as follows:

The solar controller has an override feature to charge LiFePO4, SLA and AGM batteries.  Attach the battery first to the controller, then see below:

1) The 1st screen is the battery voltage also known as the "home" screen.
2) Push the left red button.  The second screen is the float voltage of the solar panel to the battery (13.8VDC).
3) The 3rd screen is the charge voltage of the battery (14.4VDC).
4) The 4th screen is the regulated voltage to the load (12.6VDC)
5) Screen 5 is the cutoff voltage (10.8VDC)
6) Screen 6 is a timer screen that is not implemented
7) Screen 7 is the battery type.  By default "b00"  is for Lithium Iron Phosphate batteries.  To charge SLA/AGM batteries, hold the left button for 6 seconds, and the "b00" display will start flashing, then push the right button to change to "b01".

Screen 2, 3, 4, 5, 6 are hard-coded (hard-programmed) -- there's nothing that you would change on those screens.

The Bioenno Power Lithium Iron Phosphate (LiFePO4) Battery Model BLF-1220A is a state-of-the-art 12V 20Ah battery. The BLF-1220A is the entry level unit of Bioenno Power's high-power 12V battery line designed for more stationary applications and higher power consumption portable electronics requiring a higher capacity and greater power output battery while demanding a battery which can reliably provide excellent performance over an extended service life. The battery has an integrated PCM (protection circuit module) which provides complete internal cell balancing, complete integrated protection along with integrated charge circuitry and boasts no EMI/RFI (Electromagnetic Interference/Radio-Frequency Interference) and is absolutely quiet! This unit has available a 110VAC/220 VAC AC-to-DC charger, that provides 4A, with a DC Plug. Please note that this battery should be charged using a LiFePO4 compatible charger, and not with a charger for SLA batteries.

BLF-1220A User Manual [PDF]

Model BLF-1220A Battery Specifications
Voltage: 12V
Capacity: 20Ah
Case Type: PVC Pack
Charge Connector: DC Barrel Plug
Discharge Connector: Anderson Powerpole
Maximum Continuous Discharge Current: 40A (make sure your electrical load consumes less than 40A)
Maximum Power Delivered to Load at 12V: 480 Watts (12V x 40A = 480 Watts)
Maximum Peak Discharge Current: 60A (3 sec)
Dimensions:(L x W x H) 6.5 in. x 4.31 in. x 3.3 in. (160 mm x 108 mm x 83 mm)
Weight: 5.4 lbs. (2.4 kg.)
Includes built-in PCM (protection circuit module) which provides internal cell balancing and management, protection from overcurrent, undervoltage (overdischarge), overvoltage and short circuiting, and has integrated charging circuitry
Available 110VAC / 220 VAC Charger

Compatible AC-to-DC Charger Specifications
Input Voltage: 110VAC/120VAC
Output Voltage: 14.6VDC
Current: 4A
Connector: DC Plug
Model Number: BPC-1504DC

Power Box

Exterior Dimensions (including binding posts): 9.75 in. H x 7.375 in. W x 13.5 in. L (247.7 mm x 187.3 mm x 342.9 mm)
Maximum Interior Dimensions: 5.88 in. H x 5.94 in. W x 11 in. L (149.2 mm x 150.9 mm x 279.4 mm).

Additional height is available in limited areas due to the shape of the lid and wire harness, up to 7.00 in. (187.3 mm).

Power Box can take up to 12 business days to ship.

Policy
Shipping: Standard 
Returns/Exchange: 30 Days
Warranty: 2 Year Warranty

Notes

General:  I noticed the Max and Peak Continuous Discharge on the label may be different from the website and why? 

The printed label may be rated to 1C Max Continuous or 2C peak.  However, for some models of batteries including the BLF-1212A, BLF-1212AB, BLF-1212AS, BLF-1215A, BLF-1215AS, and BLF-1220A, 30 Amp and 40 Amp PCM/BMS boards have been installed.  The de-rating on the label to 1C is mentioned to ensure the battery can deliver more than 2,000 to 3,000 cycles.  However, rest assured these batteries can deliver the 23 Amps for your ham radio equipment which has a duty cycle of 20% transmit and 80% receive.  If you operate continuous at the 2C discharge (with no duty cycle), the cycle life is a bit less to about 1,800 to 2,000 cycles instead of 2,000 to 3,000 cycles.

Bioenno Power offers a 14.6VDC, 4A AC-to-DC Charger for LiFePO4 batteries, Model BPC-1504DC, which uses a DC plug for charging LiFePO4 batteries.  Please ensure that the LiFePO4 batteries include a PCM/BMS when using this particular charger.

 

Specifications
Input:  110 VAC/220VAC
Output:  14.6VDC, 4A (CC/CV Charge Profile for LiFePO4 Batteries)
Dimensions:(L x W x H ) 5.25 in. x 2.25 in. x 1.125 in. (133.35 mm x 57.15 mm x 29.00 mm.)
Weight: 1 lb. (0.45 kg.)
Connector: DC Plug 

 Policy

Shipping: Standard
Return/Exchange: 30 Days
Warranty: 1 Year Warranty


Share this Product


More from this collection

Back to the top